PRODUCT GROUP: ENGINEERING PRODUCTS[1]

PRODUCT CODE 61

SNo	Description	DEPB Rate	Value Cap
1	All Aluminium conductors (AAC) bare	6	.
2	Aluminium Conductors Steel Re-inforced (ACSR)	5	.
3	Aluminium conduit bodies made of Aluminium and other alloying constituents	4	.
4	Aluminium Flexible Tubing	4	.
5	Deleted	.	.
6	Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of	4	.
7	Extruded aluminium products including pipe and tubes	4	.
8	Cast articles including parts/components of Aluminium	4	Rs.125/Kg
9	Rolled Aluminium plates, sheets, strips including coprugated Aluminium sheets/strips	4	.
10	11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm sq.	8	.
11	11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq.	8	.
12	11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq.	8	.
13	600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq	8	.
14	600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq.	8	.
15	600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq.	8	.
16	600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq.	8	.
17	600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq.	8	.
18	600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4x120 Sq.mm	8	.
19	Electrical Wiring Accessories wholly made of Brass	7	Rs.240/Kg.
20	Complete ceiling fan with metal blades (36"/42”/48”/56”/60”)	3	.
21	Electric Pedestal Fan	4	.
22	Electrical Fan with Table Stand/Wall Bracket	4	.
23	Fluorescent Tubes (18/20 /36/40 Watts)	6	.
24	Galvanised transmission line towers and parts thereof	3	Rs.45/ Kg.
25	GLS Lamps (upto 100 Watts and below)	6	.
26	H.P.M.V. Lamps (250 W)	6	.
27	H.P.S.V Lamps (250 W)	6	.
28	H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)	6	.
29	H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)	6	.
30	Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor.	9	.
31	Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor	9	.
32	Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor	9	.
33	Marine Cable flexible Non Burning (TPR) 4 X 1.5	6	.
34	Marine Cable flexible Non Burning (TPR) 4 X 2.5	6	.
35	Marine Cable flexible Non Burning (TPR) 12 X 1.5	6	.
36	Marine Cable flexible Non Burning (TPR) 3 X 4.00	6	.
37	Marine Cable flexible Non Burning (TPR) 3 X 6.00	6	.
38	Marine Cable flexible Non Burning(TPR) 2 x 1.5	6	.
39	Marine Cable flexible Non Burning(TPR) 3 x 1.5	6	.
40	Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5	6	.
41	Marine Cable Non Burning for Stationary laying (PVC) 2 X 2.5	6	.
42	Marine Cable Non Burning for Stationary laying (PVC) 3 X 1.5	6	.
43	Marine Cable Non Burning for Stationary laying (PVC) 3 X 2.5	6	.
44	Marine Cable Non Burning for Stationary laying (PVC) 3 X 10.00	6	.
45	Marine Cable Non Burning for Stationary laying (PVC) 3 X 16.00	6	.
46	Marine Cable Non Burning for Stationary laying (PVC) 3 X 25.00	6	.
47	Marine Cable Non Burning for Stationary laying (PVC) 3 X 50.00	6	.
48	Marine Cable Non Burning for Stationary laying (PVC) 3 X 70.00	6	.
49	Marine Cable Non Burning for Stationary laying (PVC) 3 X 95.00	6	.
50	Marine Cable Non Burning for Stationary laying (PVC) 7 X 1.5	6	.
51	Marine Cable Non Burning for Stationary laying (PVC) 12 x 1.5	6	.
52	Out door Weather proof light fitting round/ Oval Shape with Glass Shell excluding Automotive light fittings.	6	.
53	Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC Shroud And (with or without ring, lock and nut)	7	.
54	Single Phase Electrical Energy Meter	6	.
55	11 KV straight through Joints for XLPE Copper Cable size 3 x 95 Sq. mm.	6	.
56	Starter Motor Armature for High Speed Vehicles Cars etc.	4	.
57	Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)	5	.
58	Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)	5	.
59	Steel Welding Electrodes	6	.
60	Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII	4	.
61	Three Phase Electrical Energy Meter	6	.
62	Tinned/Untinned copper cables lugs /sockets/ connections	6	Rs.260/Kg
63	Tinned/Untinned copper ferules	6	Rs.260/Kg
64	Tinned/Untinned copper terminals ends	6	Rs.260/Kg.
65	Ferrous Automotive Cast Products	.	.
66A	Nuts/Bolts/screws/washers made of Alloy steel including stainless steel	5	Rs.200/Kg.
66B	Nuts/Bolts/Screws/washers made of Non-alloy Steel	3	Rs.25/Kg
67A	Bright bars made out of Stainless Steel	5	Rs.80/Kg.
67B	Bright bars made out of Mild Steel	2	Rs.23.50/Kg
67C	Bright bars made out of items other than Stainless Steel and mild steel	4	Rs.24/Kg.
68A	Carbon Steel/ Non Alloy Steel Forgings (Machined)	3	Rs.105/Kg.
68B	Alloy Steel Forgings (Machined)	7	Rs.175/Kg
68C	Stainless steel forgings (Machined)	7	Rs.400/Kg.
69A	Carbon Steel/Non Alloy Steel Forgings (Rough)	3	Rs.85/Kg.
69B	Alloy Steel Forgings (Rough)	7	Rs.125/Kg
69C	Stainless steel forgings (rough)	7	Rs.300/Kg.
70 A	High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Alloy steel including stainless steel	4	Rs.60/Kg.
70 B	High tensile precision fastners Cold/ Hot forged Bolts/ Screws/ Nuts-All varieties of Non-Alloy steel	2	Rs.25/Kg.
71 A	Hot forged nuts of Alloy Steel including stainless steel	5	Rs.60/Kg.
71 B	Hot forged nuts of Non-Alloy Steel	3	Rs.25/Kg.
72	Cast Iron Products (Rough/Machined) (not elsewhere specified)	3	Rs.25/Kg.
73	Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or steel	2	Rs.40/Kg.
74	Chisels made of forging quality carbon steel	3	Rs.60/Kg.
75A	Drop forged Pliers of Alloy Steel	7	Rs.125/Kg
75B	Drop forged Pliers of Non-Alloy Steel	3	Rs.125/Kg
76	Hand Drill	3	.
77	High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile)	4	.
78	Pipe Wrenches	4	Rs.85/kg
79	Punches	2	.
80	Screw Drivers (Nickel plated)	2	.
81	Deleted	.	.
81A	Spanners made of Alloy Steel	7	.
81B	Spanners made of Non Alloy steel	3	.
82	Steel files of Alloy Steel	4	.
83	Steel files of High Carbon Steel	2	.
84	Steel Vices	4	Rs.65/kg
85	Cold Rolled Galvanised, Colour coated Non-Alloy steel sheets/ hoops and strips/ wide coils (plain / corrugated)	5	Rs.32.50/Kg.
86	2" Galvanised flanges with rubber gaskets	3	.
87	2" Galvanised/ Zinc Coated Bungs	3	.
88	2" Galvanised/Zinc coated Flange	3	.
89	3/4" Flanges with or without Washer	3	.
90	3/4" Galvanised bungs with rubber gaskets	3	.
91	3/4" Galvanised flanges with rubber gaskets	3	.
92	3/4" Galvanised Zinc coated Bungs	3	.
93	3/4" Galvanised/ Zinc coated Flanges	3	.
94	Adjustable Bracket made out of MS sheet	3	.
95	Wood to steel adapter (All Types)	3	.
96	Aluminium collapsible tubes	7	.
97	Aluminium Pencil Sharpner	4	.
98	Aluminium rivets	6	.
99	Aluminium Utensils with Interior PTFE Coating & Exterior painted (non-stick) with/ without handle.	3	.
100	Animal Drawn Ploughs/ Parts thereof	2	.
101	Arm Blade	3	Rs.20/Kg.
102	Aruvil Double Wheel Carrier kit Set	3	.
103	Axes	2	.
104	Ball Chain Cap	3	.
105	Barb Arm	3	.
106	Barb Arm Base	3	.
107	Black Pipes/ tubes including precision Tubes	3	Rs.30/Kg.
108	Bottom/Top Plate UM-1 made of Tin Plate	3	.
109	Box Hinge	4	.
110	Brace Band	4	.
111	Brace Rail End	4	.
112 A	Nuts milled from bar process of Alloy Steel including Stainless Steel	5	Rs.60/Kg.
112 B	Nuts milled from bar process of Non-Alloy Steel	3	Rs.25/Kg.
113	Brass Builder Hardware	3	Rs.325/Kg.
114	Brass Tubes	5	Rs.150/Kg.
115	Brass valves	3	.
116	Bull Dog Hinge	3	.
117	Seamless Butt Welded Steel Pipe Fittings made from Seamless/ERW Steel Tube	6	Rs.120/Kg.
118	Cl Cistern	3	.
119	Cl pipes and Fitting, not elsewhere specified	3	.
120	Coil Spring / Helical Coil Spring	3	Rs.20/Kg.
121	Collar of M.S. Sheet	3	.
122	Corner Arm	3	.
123	Crow Bar /Wrecking Bar	3	Rs.35/Kg.
124	Cultivator made of mild steel	2	.
125	Cut Hand tacks made of M.S. Sheets	2	.
126	Decorative Handicrafts/ Artwares made of Anodised Aluminium	3	.
127	Door/ Window/ ventilator Sections made of mild steel	2	.
128	Double Carrier Wheel	3	.
129	Drag Link Chain	3	.
130	Ductile Iron Spun Pipes	3	.
131	Electrolytic Tinplate components	2	.
132	Round/Eliptical /Oval Tin Plate container and/ or components thereof	3	.
133	Deleted	.	.
134	Female Hinge	3	.
135	Flange Plate	3	.
136	Floor Flange	3	.
137	Fork	3	.
138	Fork digging with socket	3	.
139	Galvanised non alloy Steel Wire Ropes (wire steel core)	3	.
140	Galvanised non alloy Steel Wire Ropes (fibre core)	3	.
141	Deleted	.	.
142	Deleted	.	.
143	Deleted	.	.
144	Deleted	.	.
145	Deleted	.	.
146	Deleted	.	.
147	Deleted	.	.
148	Deleted	.	.
149	Deleted	.	.
150	Deleted	.	.
151	Deleted	.	.
152	Deleted	.	.
153	Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3"	4	Rs.35/Kg.
154	Gate Clip Made of Mild Steel	4	.
155	Gate Hold Back made of Mild Steel	4	.
156	Gate Latch Made of Mild Steel	4	.
157	Gun metal valves	3	.
158	MS Colour coated ghamla (made of HS Steel)	3	.
159	Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator)	1	.
160	Heavy duty Fork latch	3	.
161	Deleted	.	.
162	Deleted	.	.
163	High Chromium Grinding media balls	3	Rs.35/Kg.
164	Hot Dipped Galvanised tension Bar/ Gate Rods/ Truss Rods/ Drop Rods.	2	.
165	ILD Fork	3	.
166	ILD Guide	3	.
167	Industrial Offset Hinge	3	.
168	Industrial Offset Bracket	3	.
169	Industrial Locking Device	3	.
170	J-bracket	3	.
171	Locks and valves water pipe fitting	3	.
172	Loop Cap Made of Mild Steel	3	.
173	LPG Cylinders with valves	3	.
174	Male Hinge/Male Bracket Made of Mild Steel	3	.
175	Male Lag Bracket Made of Mild Steel	3	.
176	Marine freight containers of type ICC 20'x8'x8.5'	6	.
177	MS Paper pin & Clip	3	Rs.40/Kg.
178	Steel Needle Screws Self colour or Plated	4	.
179	Nickel Plated M S Buckles	3	.
180	Offset Rail End	4	.
181	OTS Cans/ dingeley cans	4	.
182	Oxygen Cylinder dia 140 NF	3	.
183	Oxygen Cylinder dia 229 MM	3	.
184	Deleted	.	.
185	Photo frame (Brass)	4	.
186	Presensitised Positive Offset Aluminium plates	6	.
187	Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass	3	.
188	Rail End	4	.
189	Rakes/Garden Rakes/ Fork Manure Hooks made of Iron and/or Steel	3	.
190	Rectangular/ Square Tin Plate container and/ or components thereof	3	.
191	Rectangular/Square Tin Plate container and/or component thereof with round neck.	3	.
192	Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece)	3	.
193	Deleted	.	.
194	Sanitary and bathroom fittings (of brass)	3	.
195	Sanitary and bathroom fittings (of gun metal)	3	.
196	Shovels/Spades made of Iron and/or steel, with or without handle, irrespective of what material the handle may have been made of	3	.
197	Folding bed made of mild steel	2	.
198	Sleeve made of Mild steel	4	.
199	Sleeve Bracket made of mild steel	4	.
200	Stainless Steel safety razor Blades	4	.
201	Stainless Steel Vacuum Flask	5	.
202	Stainless steel wire rope	4	.
203	Stapler	1	.
204	Steel Clamp (Galvanised) and ungalvanised-All types	3	.
205	Mild Steel pegs	3	.
206	Mild Steel Weld mesh	3	Rs.55/Kg.
207	Mild Steel Stranded wire	3	Rs.26/Kg.
208	Surgical blades other than made of High Carbon Steel	2	.
209	Surgical Blades made of High Carbon Steel	2	.
210	Table Pencil Sharpener made of plastics	5	.
211	Tension Band	3	.
212	Tiller Left Hand or Right Hand	2	.
213	Top and Bottom cover of Round Battery Jacket made from Tin plate	1	.
214	Tower Crane	9	.
215	Track Wheel	3	.
216	Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/Razor Box (1 Razor Handle + 5 twin blades in a magazine both packed in a plastic box)/ Razor Card(1 Razor Handle + 5 twin blades in a magazine	4	.
217	Twin type shaving system Razor/ Razor Handle	3	.
218	Mild steel U-Bolt	2	.
219	Deleted	.	.
220	Mild Steel Universal Bracket	3	.
221	Valve for LPG Cylinder, Hand wheel type, made of Brass	3	.
222	Water meters of outer casing made of brass.	3	.
223	M.S. Wire Wire Nails	2	.
224	Wood screws made of carbon steel self colour or plated	2	.
225	Zinc plated (Galvanised) conduit Hanger	2	.
226	Ball/ Roller /Thrust/ clutch release/ spherical plain Bearing	5	Rs.600/Kg.
227	Bench Grinder 6"	2	.
228	Brazed Carbide Tools	7	.
229	Brazed Tools Carbide Tips	6	.
230	Pneumatic tool	5	.
231	Cutting Tools of High speed Steel (Cobalt Grade)	3	.
232	Cutting tools of High Speed Steel (Non-Cobalt Grade)	3	.
233 A	Casing Pipes conforming to API Specifications 5CT or equivalent of OD 114mm to 508mm (4 to 20)made out of Seamless Steel Pipes	3	Rs.130/Kg.
233 B	Casing Pipes confirming to API Specifications 5CT or equivalent of OD 114mm to 508 mm (4 to 20) made out of ERW Steel Pipes	3	Rs. 40/Kg.
233 C	Tubing/Hollow Drill Rods/Coupling/Core Barrels and substitutes made out of Carbon Steel Seamless Tube/Pipe	3	Rs.130/Kg.
234	Drills/Reamers End Mills/ Broaches Milling cutters incuding Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade).	4	.
235	Drills/Reamers End Mills/ Breaches/Milling cutters including Threading Tools/ Taps of High speed (Cobalt Grade)	4	.
236	Pneumatic Revetting hammer	5	.
237	Resin bonded diamond wheels	3	.
238	Saws/ Segments made from high speed steel strips/ sheets	3	.
239	Front Engined Three Wheeler Drive away Chasis in CKD/SKD/ CBU condition	7	.
240	Rear Engined Auto Rikshaw in CKD/SKD/CBU condition	7	.
241	Scooter (in CKD/SKD/CBU condition)	7	.
242	Motor Cycle (in CKD/SKD/CBU condition)	7	.
243	Moped (in CKD/SKD/CBU condition)	7	.
244	Alternator Assembly	6	.
245	Non-alloy Steel Anchor Pin	3	.
246	Armature for Delcoremy type motor	4	.
247	Armature for Dynamo	4	.
248	Starter Motor Armature for Low Speed Vehicles	3	.
249	Automobile Tyre-Tube Valves	5	.
250	BB Axle	3	.
251	Brake shoe plate	3	.
252	Cam	5	.
253	Cam Shaft	3	.
254	CBH Flate for starter motor	7	.
255	Commutator	5	.
256	Cone Sleeve/Axle Stud sleeve	3	.
257	Connecting Rod	1	.
258	Cotter pin	3	.
259	Crank for chain wheel	3	.
260	Crank Shaft (for four wheelers)	2	.
261	Crank Shaft (for two wheelers)	2	.
262	Crank-shaft Forgings/ Connecting Rod Forgings	4	.
263	Deep Well Hand pump complete without connecting Rods with/ without spares & Tools	7	.
264	Deepwell hand pump with 10 connecting rods.	7	.
265	Draw bars	3	.
266	Drive assembly for starter motor	7	.
267	End-Cap Assembly	6	.
268	Field Coil for Starter Motor	7	.
269	Flex Plate Assembly	2	.
270	Flywheel Starter Ring Gear	2	.
271	Front Axle beam/I-Beam	3	.
272	Front/rear axle shaft	3	.
273	Full Tension Sleeve	2	.
274	Deleted	.	.
274A	Galvanised Spokes other than for bi-cycles	4	.
274B	Galvanised spokes for bi-cycles	4	Rs.85/ gross
275	Generator (Dynamo) Assembly	7	.
276	Half Collets for engine valves	2	.
277	Deleted	.	.
278	Deleted	.	.
278A	Steel Hub bolts of non alloy steel	2	.
278B	Steel Hub bolts of alloy steel	4	.
279	Steel Hub cone	2	.
280	Ignition Coil oil filled	5	.
281	Ignition Coil Resin Cost	5	.
282	Inlet exhaust valves	2	.
283	Integral Shaft Water Pump bearing for automotive applications	6	.
284	King pin made out of alloy steel	4	.
285	Laminated Leaf Springs/Springs	4	.
286	Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition	5	.
287	Machined trailor ball/hitch pin/linkage pin	3	.
288	Nozzles made of steel	2	.
289	Oil Bath Gear case	2	.
290	Piston Pin/ Gudgeon Pin	2	.
291	Push rod	2	.
292	Rear Axle Assembly for LCV/ HCV (Assembly/SKD)	4	.
293	Rocker Arm/ Rocker Shaft made of steel	5	.
294	Roller for auto break shoe	3	.
295	Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing.	4	.
296	Sleeve Shaft and Ball Joint	2	.
297	Slip Ring	3	.
298	Slip Stub Shaft	2	.
299	Solenoid Switch Pre-engaged type	4	.
300	Solenoid Switch Co-axial type	4	.
301	Spindles made of steel	2	.
302	Sprocket with central axle	2	.
303	Starter motor with maximum current upto 1100 Amps	4	.
304	Stator for alternator for Light Duty (12 Volts 60-95 Amps)	4	.
305	Submersible Water pump sets i.e. Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes	5	.
306	Valve Tappets	2	.
307	Voltage Regulator	3	.
308	Aluminium Ingots	2	.
309	Aluminium Sow Ingots	2	.
310	Aluminium Wire Bar/ Rod	2	.
311	Brass Washers of all types	3	.
312	Brass Wood Screw	4	.
313	Calcined Alumina	5	.
314	Copper flats/ Sheets/ Strips	4	.
315	Copper Foils	4	.
316	Lead Antimony Wire	5	.
317	Phosphor Bronze fabric	5	.
318	Pressure die cast article made of zinc	5	Rs.60/Kg.
319	Tin Ingots	2	.
320	Valve Stems made of brass	3	.
321	Magnetic assemblies incorporating cast alloy permanent magnets e.g. pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/ door catches/ vee blocks bases/ hold fast	3	.
322	Galvanised/ungalvanised spikes for use as Railway Track material	3	.
323	Gear cutting tools of Cobalt bearing high speed steel	3	.
324	Industrial Diamond prod. Diamond Grinding wheels/ Diamond file and tools	3	.
325	Aluminium Pistons, in fully machined conditions	4	.
326	Ferro Chrome/ Charge Chrome	5	Rs.30.50/ Kg
327	Ferro Manganese (Fe Mn)	5	Rs.30/ Kg
328	Ferro Silicon (Fe Si)	4	Rs.49/ Kg
329	Cold Rolled Galvanised Non-alloy Steel sheets/Hoops & Strips/ wide coils/ Circles(Plain/ Corrugated)	4	Rs.30.50/Kg
330	Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)	4	Rs.9/Kg
331	Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco	6	.
332	High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars	7	.
333	High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars	7	.
334	High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars	7	.
335	High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars	7	.
336	High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products	6	Rs.64/Kg.
337	High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products	6	Rs.60/Kg.
338	Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	8	Rs.14000/MT
339	Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars	8	Rs.33000/MT
340	Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars	8	Rs.21000/MT
341	Non Alloy Steel wire Coated/ Plated or otherwise	3	Rs.22/Kg.
342	Hot rolled Galvanised Non-Alloy Steel Sheets /Hoops and strips/W	3	Rs.22/Kg.
343	Non alloy Steel Ingot, Billets, Blooms and slabs	2	Rs.21/Kg.
344	Alloy Steel Wire coated, plated or otherwise.	5	Rs.35/Kg.
345	Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed Bars, Thermo mechanically treated reinforcing Bars ), Angles, Shapes & Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers	2	Rs.22.50/ Kg.
346	Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	8	Rs.21000/MT
347	Silico Manganese (Si Mn)	5	Rs.25/Kg.
348	Stainless Steel Wires	5	Rs.97/Kg.
349	CR Stainless Steel Sheets/ Hoops & Strips/ Wide Coils/Circles with/without annealing/skin passing	5	Rs.86/Kg.
350	Hot Rolled Non Alloy Steel Plates/Wide Coils/Sheets/Hoops & Strips (including skelp)	3	Rs.22/Kg.
351	Low Carbon Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% Carbon)	5	Rs.90/Kg.
352	Ferro Molybdenum (60-65% Molybdenum)	5	Rs.1000/Kg
353	Table, Kitchen and other household articles made of Stainless Steel with or without handle/lid /anti-skid Rubber gasket irrespective of what material the handle/lid may have been made of	7	Rs.135/Kg.
354	Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of	7	Rs.135/Kg.
355	Aluminium artware	4	.
356	Aluminium Circles/Slugs	5	.
357	11 KV, Indoor Vacuum circuit Breaker Panels	7	.
358	CRGO Transformer Lamination (Core Laminations)	6	Rs.40/Kg.
359	11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm.	8	.
360	Cast Iron Wheel	3	.
361	Cold Rolled painted/ coated High Tensile steel strapping	3	Rs.29/Kg.
362	Ferrous investment & Precision castings	2	.
363	Manhole Cover	3	.
364	Sanitary casting	3	.
365A	Forged Steel ball made of mild steel/non-alloy steel	3	Rs.80/Kg.
365B	Forged Steel ball made of alloy steel	6	Rs.100/Kg.
365C	Forged steel ball made of stainless steel	6	Rs.175/Kg.
366	Thermostatic type bimetal/ trimetal strip of various grades	5	.
367	Cast Iron Weights	3	.
368	Cast Iron Vice	6	Rs.65/kg
369	Hacksaw Frame	3	.
370	Automatic Socks Knitting Machine (Mechanical)	7	.
371	Computerised Automatic Power Socks Knitting Machine	7	.
372	Hydraulic End Cap	2	.
373	Injection moulding machine parts: Deckel /Cover made of non Alloy Steel	2	.
374	Injection Piston	2	.
375	Plates Injection cylinder	2	.
376	Speed Frame Drafting System	3	.
377	Tail Stocks made of Steel	2	.
378	Textile Spindle upper part	5	.
379	Textile spindle with insert	5	.
380	Thrust housing made of Steel	2	.
381	Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/Billets/Slabs), Bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire rods etc)., Angles, Shapes & Sections (including Special Profiles), Plates, Hot Rolled Sheets/Hoops and Strips (including Skelp)/Wide Coils	5	Rs.28/Kg
382	Alumina Carbon Bricks/ Shapes and/or Ramming Mass, Castables and Mortars	6	.
383	Alumina Carbon/ Slide Gate Plate Refractory and Attachments	6	.
384	Alumina Fused Cast Refractories	6	.
385	Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	6	14000/MT
386	Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron)	4	Rs.10/Kg
387	Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non-Alloy/Alloy Steel (excluding Stainless Steel) Sheets/Hoops and Strips/Wide-Coils, including CRCA	3	Rs.26.50/Kg
388	Iron Ore pellets (from Limonite Ore)	3	Rs.2.50/ Kg
389	Iron Ore Pellets. (from Haematite Ore)	3	Rs.2.50/ Kg
390	Stainless Steel Ingots, Semis (Blooms/Billets/Slabs) Bars and Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Chaannels, Special Profiles), Plates / HR Sheets/Hoops and Strips (including Skelp)/Wide Coil	5	Rs.53/ Kg
391	Pig Iron/Hot Metal	3	Rs.13/ Kg
392	Alumina Carbon Continuous Casting Refractories and/or Mortars	6	.
393	2" Bungs with or without Washer/Gasket	3	.
394	2" Flanges with or without Washer/Gasket	3	.
395	Bolt Axle made of mild Steel	2	.
396	Boulevard Clamp made of Steel	3	.
397	Box Girders for Bridges	2	.
398	Clevis	3	Rs.40/Kg.
399A	Hoe Blade	2	.
399B	Hoe Eye	2	.
400	Articles manufactured out of GP Sheets not elsewhere specified	2	Rs.30/Kg.
401	Articles manufactured out of Tin Plate prime quality not elsewhere specified	3	.
402	Postcap	3	.
403	Rectangular tops made of Electrolytic tin plate fitted with screw neck & handle and bottoms	3	.
404	Round tops/ ends (bottoms) of containers made of tin plate	3	.
405	Rubber Wheel made of mild steel	4	.
406	Mild Steel Scrool	4	.
407	Vertical Arm made of mild steel	4	Rs.25/Kg.
408	Y Arm Made of mild Steel	4	Rs.25/Kg.
409	Slitting cutters made of mild steel	1	.
410	Deleted	.	.
410A	Forged Crank Shaft made of non alloy steel	3	Rs.75/kg
410B	Forged Crank Shaft made of alloy steel	7	Rs.95/kg
411	Deleted	.	.
411A	Front Axle Beam – Forging made of non alloy steel	3	Rs.70/kg
411B	Front Axle Beam – Forging made of alloy steel	7	Rs.73/kg
412	Deleted	.	.
412A	Forged Crank Shaft Fully Machined made of non alloy steel	3	Rs.185/kg
412B	Forged Crank Shaft Fully Machined made of alloy steel	7	Rs.185/kg
413	Front Axle Beam – Fully Machined	3	.
414	MS Window, Doors, Ventilators, Grate, Grille, fabricated, frames and Components/ parts thereof	3	Rs.25/Kg.
415	Non Alloy Steel Flanges/ Couplings / Tees/ Elbows	2	.
416	Seamless Stainless Steel Tubes (Cold Finished)	3	Rs.250/Kg.
417 A	Fully Threaded Rod made of non-alloy steel/ mild steel(Galvanised/Ungalvanised)	3	Rs.20/Kg.
417 B	Fully Threaded Rod made of Alloy Steel including Stainless Steel	6	Rs.90/Kg.
418	PTFE Cables	7	.
419	Silica Bricks/Shapes For B.F Stoves	4	.
420	Silica Bricks/Shapes For Coke Ovens	4	.
421	Silica Mortar	1	.
422	Stainless steel flanges/ couplings / Tees/ Elbows	6	.
423	Bicycle Chains	1	.
424	Manganese Steel Cast Articles (Rough/machined)	5	.
425	Non Alloy Steel Castings Rough/Machined	3	.
426	Spheroidal Graphite/ Malleable/ Ductile Iron Castings (Rough/machined)	3	.
427	Copper Bonded Grounding Rods	3	.
428	Bearing Races	1	.
429	Carbon/Non Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)	3	.
430	Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)	5	Rs.55/Kg.
431	Fabricated Steel Hardware/ Structure/Articles not elsewhere specified Made out of MS HR/CR Plates Sheets/Strips/wide Coil of relevant grade type	2	.
432	Industrial Roller Chain / Motorcycles including Moped Chain/ Automotive Timing Chains ( all types including spares )	2	.
433	Industrial Valves (cast or forged body)	2	.
434	MS Bucket Handles Duly Nickel Plated	2	.
435	Perforated Construction Stakes (Round/ Flat/ Square)	2	.
436	Printed Lug Cap With Internal Coating Lined With PVC Compound	2	.
437	Steel Hinges – Bar Type	2	Rs.20/Kg.
438	Zinc Plated (Galvanised) Steel Lock Nuts (Blanked/Punched) from H.R.Coil/ Sheet	3	Rs.150/Kg.
439	Automotive Water Pump	3	.
440	Clutch Cover Assembly	1	.
441	Clutch Plate/Disc Assembly/Driven plate	1	.
442	Spline Hubs for clutch plate	2	.
443	Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised	1	.
444	Tractor Parts – Ratchet Jack Assembly	2	.
445	Brass Wire	4	.
446	Stainless Steel Rough/ Machined Castings	5	.
447	Aluminium Foil Commercial Grade Embosed Cut of Shape, Performed Coated Printed for other Reinforcing Material	4	.
448	Aluminium Foil Paper backed	5	.
449	Aluminium Foil Plastic Coated/ Laminated	4	.
450	Aluminium Foil – Synthetic Resin/ Lacquer Coated Printed	4	.
451	Aluminium Foil – Synthetic Resin/ Lacquer Coated	4	.
452	9 KV 5 KVA Conventional Surge Arrester Distribution Type With Mounting Breenet And Insulators	6	.
453	Non-Alloy Ground/ Earthing Rods (Galvanised)	3	Rs.55/Kg.
454	Stainless Steel Cable Ties made of SS.316 Grade	1	.
455	Alloy Steel Castings (Rough/Machined)	4	.
456	Galvanised Steel Stranded Wire (Wire Strand)	3	.
457	Anchor Bolt With Nut	2	.
458	Ferro Vanadium	7	Rs.542/ Kg
459	Magnesium Ferro Silicon	5	Rs.25/ Kg
460	Cable Ties made of Stainless Steel	1	.
461	Pilfer proof caps/ Seals –Plain/printed with EP Liner	5	.
462	Pole Line Hardware fittings and Accessories (Galvanised)	3	.
463	Carbon steel submerged arc welded pipes as per API grade or ASIM grade or equivalent or hot formed steel bends as per API, ASTM grade or equivalent degree: 0-180 degree	3	Rs.33000/MT
464	Cold rolled/formed ring for bearing races, CV cages	4	.
465	CRCA butt hinges	1	.
466	CRCA hinges electric brass plated	1	.
467	CRCA hinges self colour	1	.
468	CRCA hinges zinc plated	1	.
469	TEE Hinges (painted/ zinc plated) made of steel	1	.
470	Transformer (copper wound) above 100% KVA upto and including 400 KVA 3 phased, oil cooled.	5	.
471	Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled.	5	.
472	Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled.	5	.
473	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr.	4	Rs.38000/MT
474	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr.	4	Rs.38000/MT
475	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr.	4	Rs.38000/MT
476	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr.	4	Rs.38000/MT
477	Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter	6	.
478	Electric door bell	6	.
479	Steel tapes/rules (1 meter to 50 meters)	1	.
480	Ceramic coated steel pipes with or without coupling	3	.
481	Insulated cryogenic tanks for storage and transport of compressed and liquidified gases	2	.
482	Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB	4	.
483	Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5 – 2.5%, Carbon 1.5 – 2.5% balance Iron	3	.
484	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14	1	.
485	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy GA-17G/A-17X	1	.
486	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-30/KS-30/F-14/SAE/ 48/SL	1	.
487	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L-200/G-24/SAE-15	1	.
488	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-10/Lok Sabha-10/g-46/sae/797/SYF-100/F-59	1	.
489	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper Lead Alloy of GS-23/L.S-23/G-48/SAE-799/SX/F-250/F-7	1	.
490	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP	1	.
491	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/SL/ KS30/ GS30/F-14	1	.
492	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/SL/KS30/ GS30/F-14	1	.
493	Deleted	.	.
494	Deleted	.	.
495	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based F-820/F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A6/GA 6/A300/G73/SAE 770-780	1	.
496	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin BASED ALLOY GA 6/ A6/G 73A 300/SAE 770/ AS11	1	.
497	Thin-walled Engine Bearing Bushing and Thrust Washers in Steel Backed Copper Based High Tin Alloy F-780/SP/H24/GS25/G-41/SQE-49	1	.
498	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based AlloyF100/SY/HF2/ LS10 /gs10/Glyco-46/SAE/792	1	.
499	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-250/SX/HF 16 orH-116/LS-23/GS-23/ Glyco-48/SAE-792	1	.
500	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783	1	.
501	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770	1	.
502	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/ G-32/B-100/SAE-12	1	.
503	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13	1	.
504	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X	1	.
505	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy AL-6	1	.
506	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Lead Alloy F-66/AL-6M	1	.
507	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2	1	.
508	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/ GL-13/L-100/F-99/SAE-13/GM-155	1	.
509	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41	1	.
510	Deleted	.	.
511	Chain wheel	2	.
512	Multispeed free wheel	2	.
513	Welded steel pipe fitting	2	.
514	Bronze impellers for inter stream/ Thrustream pumps all types	2	.
515	Taper roller bearing	4	.
516	Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever	1	.
517	Cast iron parts for sewing machine namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft	1	.
518	Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for C.C. Rod, Shuttle Race top spring, O/S Rock shaft	2	Rs. 60/Kg.
519	Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover	1	.
520	Portable bag closure machine	2	.
521	Submersible pumps	8	.
522	Non alloy steel forged (machined) hammers upto 10 kgs piece wt. without handle or with handle made of steel /wood/ rubber gripped steel pipe.	2	.
523	Chain wheel and Crank set	2	.
524	Triple chainwheel and crank set	2	.
525	Multi Cylinder Fuel injection Pumps for Diesel Engines	5	.
526	Single Phase Motor	2	.
527	Automotive Oil filters/fuel filter/Spin on filters/oil or fuel filter assembly/canister-lub oil filter/air filter	2	.
528	Aluminium Alloy Billets	1	.
529	Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere sepcified.	3	Rs.105/kg
530	Deleted	.	.
530A	Identifiable ready to use machined parts / components made wholly or predominantly of Alloy Steel (not less than 90% by weight) manufactured through Forging process, not elsewhere specified	7	Rs.175/kg
530B	Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Forging process, not elsewhere specified	7	Rs.400/kg
531	Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere sepcified.	3	Rs.25/Kg.
532	Identifiable ready to use machined parts/components made wholly or predominantly of Carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere sepcified.	3	Rs.45/kg
533	Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel(0ther than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere sepcified.	4	Rs.85/kg
534	Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process, not elsewhere sepcified.	5	Rs.125/kg
535	Brake Drums made of Alloy Cast Iron	4	.
536	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA.	4	.
537	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA.	4	.
538	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA.	4	.
539	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA.	4	.
540	Nut and Shaft Assembly for Automobile	3	.
541	Paper Punches	1	.
542	Truck & Trailer Wheels	3	.
543A	(a) Carbon Steel Forged Flanges	3	.
543B	Alloy Steel including Stainless Steel Forged Flanges	5	.
544	Electrode holder mainly made of copper or brass	3	.
545	Staples/ Staples in strips made of wholly galvanised steel wire	2	.
546	Disc Horn	5	.
547	Stainless Steel casseroles	2	.
548	Handle Bar Switch	6	.
549	Grip for Handle Bar	3	.
550	Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW	6	.
551	Rear Axle Housing Assembly for LCV/HCV	4	.
552	Constant Temperature Baths	3	.
553	Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/27 - 1000 pcs	3	.
554	Earth Moving Wheel having diameter not less than 25"	3	.
555	Sewing Machine Part - shuttle hook - Mild steel	2	.
556	Cold Rolled Alloy / Non Alloy Steel Hardened and Tempered Saw Blades	1	.
557	Electrical Wiring Accessories / Components made of Phosphors Bronze	4	.
558	Textile Machinery Spare Parts - Perforated Nickel Screen	1	.
559	PCB Routers	3	.
560	Electrolytic Tin Plate	3	Rs.35/Kg
561	Plastic Extrusion Plant and Machinery	4	.
562	Automobile Locks other than Ignition Locks	4	Rs.700/Kg.
563A	Automobile Ignition Locks for cars	7	Rs.3000/Kg.
563B	Automobile Ignition Locks for two wheelers	6	Rs.525/Kg.
564	Aluminium Oxide Resin Disc	3	Rs.8/Piece
565	Endless coated Zircon Cloth Belts	6	Rs.330/Sq.Mtr.
566	Non-Cast Hardware Fittings made of Stainless Steel Rod, Grade 304	4	Rs.350/Kg.
567	FTL Caps	5	Rs.350/Kg.
568	Vetrified Grinding Wheel	4	.
569	PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 mm-6.5 mm	6	.
570	Hypodermic Needle Disposable	2	.
571	Spheroidal Graphite Quality/Steel quality Alloy IC quality/ICDP quality/High Chrome quality Rolls for Rolling Mills.	3	.
572	Watch Dials made out of Nickel Silver Brass Strip Published	8	Rs.47 / dial
573	Steel Cops/Pirn/Bobbins	3	Rs.56/Kg.
574	Hermetically Sealed Compressor for Air Conditioners using R-22 refrigerant gas	8	Rs.4000/ Piece
575	Agricultural Sprinkler mainly made of Brass	2	.
576	Earth Moving Wheel components, namely, Bead Seat Ring, Gutter Band Fixed Flange & Lock Ring	3	Rs.80/Kg.
577	Earth Moving Wheel Components, namely, Detachable Flange/Loose Flange Center Band Disc & Side Ring	2	.
578	Chrome/Nickel Plated wire wheel for all types of car	2	.
579	Shock Absorber	4	.
580	Power take offs/clutches	2	.
581	Shoulder Bolt made out of CHQ alloy steel / Stainless Steel	2	Rs.800/Kg.
582	Dowell Pin made out of CHQ steel alloy steel/Stainless Steel	4	Rs. 400/Kg.
583	Single Cylinder Pump for Diesel Engine	6	Rs.1150/Kg.
584	Nickel Screen	1	.
585	All Aliminium Alloy Conductor	6	.
586	Auto Parts Double Brake Chamber Type 24 L/S	2	Rs.750/No.
587	Auto Parts Brake Chamber Type-16 L/S, Type-20 L/S, Type 24 L/S, Type 30 L/S, Type 30 S/S	2	Rs.375/No.
588	Hermetically Sealed Compressor for Refrigerators & Commercial Refrigeration Applications using eco-friendly gases	4	Rs. 1200/Pc
589	Textile Machinery Continuous open with Chainles Mercerising Machine	5	Rs.700000/No.
590	Zinc Concentrates	2	.
591	Tube Forming Rolls	2	.
592	Diffuser and parts thereof	3	.
593 adhoc	Steering Gear Assembly	3% valid for 6 months from the date of PN59 and applicable to M/s Rajshi Udyog, ND only
594	Medium Commercial Vehicles GVW above 7.5MT and upto 12MT in CBU/SKD/CKD condition	8		Rs.5.71 lakhs per vehicle
595	Distributor Type Fuel Injection Pump	10		Rs.20,000 / Piece
596	Stainless Steel Fabricated Tower Packings	4		-
597	Galvanized Pipes/Tubes of different wall thickness	4		Rs.35/Kg
598	Lead Concentrate	2		.
599 adhoc	Vaporizer made of Aluminium	3.00 (Valid for 6 months from the date of issue of PN-3 dt.14.9.04 and will be applicable for the exports made by M/s Inox India Ltd, Vadodara) Rs.270/Kg
600	Zinc Ingot	6		.
601	Bearing/Gear Puller Made Of Non Alloy Steel Plater/Round With Chrome Plagted Legs	3		Rs.70/kg
602	Auto Control Cable for Seat Applications	1		.
603 (adhoc)	Agricultural Tractors in CKD/ SKD/ CBU/ SKID Condition thereof.	3 (valid for a period of 6 months from 30.3.2005 or till the DEPB scheme is in operation which ever is earlier and applicable to M/s Mahindra & Mahindra Ltd, Mumbai) Rs.3,75,000/ Tractor

---

[1] Inserted by 12-PN(RE)/26.05.2005